He Gathered Up Water Bottles And A Chain…What He Made With Them Is So Cool!

When Imgur user Deckermeansbuild bought a large industrial chain at an auction, he wasn’t really sure what he’d end up doing with it.

It wasn’t until the builder came across a set of red, translucent water bottles that he had an awesome idea for one of his clients.He decided to create a unique LED lamp that they could hang on their office wall — and the result is seriously cool!

Each of the four bottles would end up being spaced out equally and attached to the link chain.

Each of the four bottles would end up being spaced out equally and attached to the link chain.

Imgur / Deckermeansbuild

He wanted to create a wave effect, so he wrapped the chain around a few one-quart paint buckets that were glued down on a wooden board.

He wanted to create a wave effect, so he wrapped the chain around a few one-quart paint buckets that were glued down on a wooden board.

Imgur / Deckermeansbuild

After tacking the links together, he removed the buckets and began welding the links so the chain would hold its shape.

After tacking the links together, he removed the buckets and began welding the links so the chain would hold its shape.

Imgur / Deckermeansbuild

Then this crafty guy welded pipe supports into the back plate that would hold the lights up.This is where the water bottles would be attached and wired.

Then this crafty guy welded pipe supports into the back plate that would hold the lights up.This is where the water bottles would be attached and wired.

Imgur / Deckermeansbuild

Read More: This Centuries-Old Technique Creates The Most Gorgeous Paper You’ve Ever Seen

The next step was to weld the chain to the back plate and then weld tubing halves onto the pipes to support the bottles.Looking pretty cool already!

The next step was to weld the chain to the back plate and then weld tubing halves onto the pipes to support the bottles.Looking pretty cool already!

Imgur / Deckermeansbuild

In order to get the water bottles to correctly fit into the lamp sockets, he drilled holes into their lids.

In order to get the water bottles to correctly fit into the lamp sockets, he drilled holes into their lids.

Imgur / Deckermeansbuild

Then he just needed to sand the backs of the bottles a little before using epoxy to glue them to the tubing.He made sure to use LED tube lights — otherwise the bottles might’ve melted!

Then he just needed to sand the backs of the bottles a little before using epoxy to glue them to the tubing.He made sure to use LED tube lights -- otherwise the bottles might've melted!

Imgur / Deckermeansbuild

I really wasn’t expecting them to look this awesome, but now I’d totally be willing to take them for myself!

I really wasn't expecting them to look this awesome, but now I'd totally be willing to take them for myself!

Imgur / Deckermeansbuild

Want to give this a go?You can find the full instructions here or just watch the video below!

If you want to check out more of Deckermeansbuild’s projects, click here.Be sure to share if you’d love to hang these cool lights in your home!

Here's How To Make Your Favorite Ice Cream Truck Treats Before The Summer's Over: Click “Next Page” below!